Skedco

Thumbnail

Showing 1–12 of 23 results

  • sk-260

    Bariatric Sked Stretcher

    Brands:
    sk-260

    Bariatric Sked Stretcher

    The Bariatric Sked Stretcher is designed to move obese patients through difficult areas with less risk of injuring your back. It is 4 feet wide, a full 12 inches wider than the standard Sked. It is a full 8 feet long. It is made of a very tough non absorbing polyethylene plastic.  This will allow for containment of the very large patients inside the stretcher thus preventing possible injuries to them from being moved.

    Bariatric Sked Instruction

     

    Size:

    Rolled in cordura pack — 10in. diameter x 48in. length

    Laid out flat — 4 feet x 8 feet

    Weight:

    17 pounds (Weight Capacity – 1,200 pounds)

    Material:

    medium density E-Z glide polyethylene plastic, 1/10th of an inch thick.

    ** Nylon webbing

    ** Solid brass grommets

    ** Steel buckles

    Temperature Range:

    Usable to -120 degrees F without becoming brittle.

    Horizontal Lift Slings:

    Webbing tensile strength 9,000 lbs.

    Read More
  • 721800_08

    CMC RESCUE/SKEDCO DRAG-N-LIFT HARNESS

    721800_08

    CMC RESCUE/SKEDCO DRAG-N-LIFT HARNESS

    Because there is a need for a quick extrication device when spinal immobilization is not a concern, the CMC Rescue/SKEDCO Drag-N-Lift Harness™ was developed and engineered as a means to rapidly package and extract a patient from a confined space

    Read More
  • sk-220

    HALF-Sked PATIENT DRAG

    Brands:
    sk-220

    HALF-Sked PATIENT DRAG

    The Half-Sked is made of the same durable material as the Sked stretcher, but is only half as long.

    The patient is secured in the Half-Sked with sewn-in two inch webbing straps with fastex style double adjustable buckles, and patients can be extricated from the tightest of confined spaces.

    Allows the patient to bend at the hips, allowing greater flexibility to turn corners.

    Should not be used as a hoisting or immobilization device, but for cost effective extrication from the most demanding confined spaces.

    Read More
  • SK-304-or

    HEAD PADS (set)

    Brands:
    SK-304-or

    HEAD PADS (set)

    This set of one double and two single 3/4 inch thick head pads is used to maintain proper spacing between the board and the head.

    When the patient is laid down it does not compress.

    Read More
  • SK-707-B 6

    Mounting Bracket For SalaLift II or SRL Winch For SKED-EVAC® Tripod

    Brands:
    SK-707-B 6

    Mounting Bracket For SalaLift II or SRL Winch For SKED-EVAC® Tripod

    Mounting Bracket For SalaLift II or SRL Winch For SKED-EVAC® Tripod

    Read More
  • sk-300-org

    OREGON SPINE SPLINT II

    $1.00
    Brands:
    sk-300-org

    OREGON SPINE SPLINT II

    $1.00

    Spinal immobilization/extrication device is the only device of it’s type that meets all of the established criteria for immobilizing a seated patient.

    Designed to provide easy access to the patient’s chest or abdominal area for treatment or diagnostic procedures. It can be used in place of a conventional short backboard and as a hip or leg splint.

    Includes a shoulder board not found in similar devices, which can be used to prevent compression of the shoulders when using a flexible stretcher.

     

    Clear
    Select options
  • SK-240C

    RANGER Sked® PATIENT/EQUIPMENT DRAG – Coyote Brown

    Brands:
    SK-240C

    RANGER Sked® PATIENT/EQUIPMENT DRAG – Coyote Brown

    The Ranger Sked, is used as a patient or equipment drag.

    Tough, durable, lightweight and extremely versatile.

    It measures 22.5 inch x 8 ft x .100 inch thickness and rolls up into a compact 7 inch diameter and 22.5 inch length.

    It is not designed for hoisting by helicopter. It is either carried by the six sewn-on webbing handles or dragged using the tow webbing.

     

    Read More
  • SK-200C-OR-672x472

    Sked Basic Stretcher System

    $1.00
    Brands:
    SK-200C-OR-672x472

    Sked Basic Stretcher System

    $1.00

    The original and still the best solution for confined space, high angle or technical rescue, and traditional land based applications, the Sked stretcher is a revolutionary design which provides outstanding patient protection and security.

    The Sked comes equipped for horizontal hoisting by helicopter or vertical hoisting in caves or industrial confined spaces. When the patient is packaged the stretcher becomes rigid.

    The durable plastic provides protection for the patient while allowing extrication through the most demanding confined spaces.

    The stretcher is rolled for storage in a tough cordura backpack which is included with the system. The system ships at 17 lbs and comes complete for most applications.

    Also available as the Sked® Basic Rescue System – O.D. Green for military, S.W.A.T. and other tactical situations.

    Clear
    Select options
  • SK-203

    Sked Rescue Stretcher Horizontal Lifting Slings

    Brands:
    SK-203

    Sked Rescue Stretcher Horizontal Lifting Slings

     

    A pair of 9,000 lb. tensile strength slings are provide for hoisting the Sked® stretcher with a helicopter or other haul system in a horizontal position.

    66″ long for the head strap and 72″ long for the foot strap.

    Read More
  • sk-204

    Sked Rescue Stretcher Tow Straps

    Brands:
    sk-204

    Sked Rescue Stretcher Tow Straps

    This 6 foot strap with bronze snap hooks on each end attaches the Sked® stretcher to the backpack, creating a useful towing harness which can be used in several configurations for towing the Sked® by one or more people.

    Read More
  • sk-209

    Sked Retainer Strap

    Brands:
    sk-209

    Sked Retainer Strap

    This strap will prevent the Sked Stretcher from unrolling after you roll it up!

    This strap also come with the SK-600-OR  so you can tie the Ethafoam Floats Log around the SK-200 to keep the flotation system together with the Sked Basic Rescue System.

    Read More
  • 208c

    SKED-EVAC® Aluminum Side Release Buckle Conversion Kit

    Brands:
    208c

    SKED-EVAC® Aluminum Side Release Buckle Conversion Kit

    The challenge of finding a quick connect/quick release buckle for the Sked® has finally been met.

    Buckles are rated at 3,000 pounds. They are durable and easy to use. When they are under tension they are very hard to release thus accidental release under tension is not an issue.

    With these buckles you will no longer have to weave the webbing through the buckles when packaging a patient. Patient packaging is often done in about half of the time as when using the original steel buckles.

    Read More

Showing 1–12 of 23 results